Aquasensor smart technology quickly senses pool fall by people that are 18 pounds or heavier to meet ASTM F2208-02. A powerful poolside alarm (100 db) and wireless remote alarm (85db) are both activated within seconds when fall is detected. Sensor Espio™ is effective in pools as large as 20' x 50'.
While Sensor Espio™ dependably senses fall, it is not falsely triggered by other routine water disturbances. Exclusive detection technology knows the difference between body fall and wind, rain, and water disturbances created by pool equipment. The result is a minimum of false alarms.
- Sensor Espio™ comes with a convenient wireless, handheld remote on/off control. For safety sake, it is designed with a limited range of 10' to require pool inspection before disarming. This is a critical design feature for maximum safety.
- Sensor Espio™ allows installation on pools with automatic pool covers.
- For pool owner convenience, the wireless indoor alarm (in option) has an extensive 100' range.
- Although totally waterproof, Sensor Espio™ must be half immerged, according to the manufacturer's recommendations, in order to work properly.
- For convenience and safety, Sensor Espio™ automatically rearms itself a few minutes after swimmers leave the pool.
- Installation is simple and fast on new or existing pools. All hardware and simple instructions are provided, including required batteries.
- As another indicator of Sensor Espio™ quality and reliability, it is backed by a 2-year limited warranty. As you can see, Sensor Espio™ anticipates and meets all the challenges for a pool alarm that’s effective, dependable, simple to install and operate, and yet invisible on the job. As you take steps to prevent the heartbreak of pool-related accidents, rely on Sensor Espio™ as your proven and positive line of defense.
|
SPECIAL NOTE : Exclusive Aquasensor Technology minimizes false alarms. Upon installation and initial start-up of Sensor Espio™ , all pool operating systems should be operating (filter pump, waterfall, fountain, cleaner, etc.).
Sensor Espio™ self-calibrates to its environment during the first 10 minutes of operation so it "knows" not to activate its alarm as the result of these normal water disturbances.
The fall detector, when activated, monitors the pool activity permanently. When a body falls in the pool, Sensor Espio™ analyses the generated underwater wave and triggers its powerful sirens to warn of the danger and therefore optimizes adult's reaction.
When you want to swim, you inform Sensor Espio™ using the provided remote control and Sensor Espio™ will therefore suspend its monitoring while you are swimming. After swimming, once you have left the pool and the pool water has become still again, Sensor Espio™ will automatically restart its monitoring and inform you.
During the time between the end of swimming and the automatic rearming of Sensor Espio™, it is compulsory to remain vigilant
Do not install your device on the pool edge before having determined the location that will ensure optimal monitoring of your swimmingpool. After having determined the appropriate location, you must ensure that the siren can be heard from your home.
Sensor Espio™ must be positioned in the center of the long side (position recommended for rectangular swimming pools) and against a flat wall in your pool. If your pool does not correspond to the configurations shown below, ask your retailer for advice.
Check that there is easy and practical access to the activation zone (where you place the magnet).
Invisible detector Sensor Espio, Compliant NF P 90-307/A1 norm
